Windows 10 is very slow, try these 5 ways to solve it | simple blogger tutorial

Windows 10 is very slow, try these 5 ways to solve it | simple blogger tutorial

 Simple Blogger Tutorial – Even though Microsoft makes many updates, many people complain about Windows 10. That is, the operating system is called slow or often lags.

 Windows 10, which often lags, will definitely disrupt the user experience.  This will obviously make work slow and a waste of time.

 But the slow problem is not only caused by the Operating System.  It could be from low RAM or due to a virus or malware to heavy programs running in the background.

 Here are five ways to deal with slow Windows 10, quoted from Appuals, Tuesday (28/9/2021):

 1. Turn Off Unnecessary Programs

 You have to turn off unwanted programs.  There are so many programs running in the background and using up some of the resources.

 This is what can cause Windows to be slow.  Especially if there are quite a lot of programs running in the background.

 To disable unnecessary programs, here’s how:

 Press and hold the CTRL, SHIFT, and Esc keys to open the task manager.

 Click the Startup tab.

 Now look at the programs that are there.  Choose one that you don’t use regularly and press Disable.  Follow this method for each program you see on the list.

 2. Check Drivers

 This method is done for users whose device lags after Windows 10 update. Basically, the operating system prefers its own generic drivers over third-party drivers.

 This means that there is a possibility that Windows 10 will replace the old drivers when installing updates.  In addition, there is also a possibility that your drivers may be outdated and might make it slow.

 To check the drivers on the computer, see the following method:

 Press Windows and press R

 Type devmgmt.msc and press Enter.

 Now check the important drivers especially the Display Driver.  Double click on Display Adapters and double click again on display devices as well.

 Click the Drivers tab.

 See the information presented, if the provider driver changes, it means the device is slow due to driver changes.  Just click the Uninstall button and follow the instructions on the screen.  Once it’s out of sight, then you can download and install third-party drivers or go back to before.

 If the problem has not been resolved as well, then you can update the driver.  Go to the manufacturer’s website and see the latest driver version.  If you find an updated driver and then download the driver file, follow these steps:

 Hold Windows and press R

 Type devmgmt.msc and press Enter

 Double click on the category of devices found in the last driver.  After finding it click Display Adapters.

 Right-click the device and click Update Driver Software.

 Select Browse my computer from driver software.

 Click Browse and navigate to the location where the driver was downloaded, select the driver and click Open.

  Click Next and follow the additional instructions on the screen.

 3. Virus Scan

 There are times when Windows is slow due to viruses, along with malware usually installing programs on the computer.  The program will run in the background.

 The program uses computer and internet resources, especially if it sends important information back to criminals.

 You have to open an antivirus program and perform a scan on the system.  Don’t do a quick scan because it’s not as efficient as a deep scan.

 4. Fragmentation

 For the record, if you have an SSD just skip this method.  Because there is no point in defragmenting the SSD.

 Fragmentation is a file in a fragmented drive on the hard drive.  This means that parts of the file are spread far apart on the hard drive.  This will slow down the PC as it has to collect a portion of files from the entire Hard Disk.

 Here’s how to do the defragmentation, but with a note it will take a long time and make sure you’re not doing anything else on the computer:

 Hold Windows and press R.

 Type dfrgui and press Enter.

 Select the drive you want to defragment and click Analyze.  This will show the status of the drive and how much the drive has been fragmented.  You should defragment if the drive is more than 10% fragmented.  But there is no difficulty to defragment even if the drive is not fragmented up to 10%.

 When the analysis is complete, you will see the fragmentation status on the drive.  If the selected drive is highly fragmented, select the drive and click Optimize.  Then it will start the defragmentation process.

 5. RAM

 Sometimes the problem is just because of the capacity of the computer.  The system will slow down if the computer does not have enough RAM to work.  Even if your computer is not slow, it is recommended to have enough space on RAM that the PC can support.

 You can upgrade the RAM to solve the problem if that’s the reason the computer is lagging.  Programs like antivirus eat up a lot of resources.  Having enough RAM will ensure the system runs fast enough with the antivirus enabled.

 So go to the computer manufacturer’s website and see the model of the computer you have.  Checks to see how much RAM it has and how much it will support.  If you have space and money then upgrade RAM.